Heated Jacket Liner: (see glove liners below)

• New Design: 2-in-1 power levels in one liner. Disconnect plugs to select either 105W or 65W watts of infrared deep penetrating evenly-distributed max. heat power
• Instant deep heating using our ActiVHeat Integral Glove internal wiring system to use the single or dual heat controller without rewiring the jacket liner.
• Designed to be plugged into a 12-13.8V DC power source or 12V battery pack via industry-standard 5.5mm x 2.5mm x 10mm connectors.
• Controllers options provide multiple ways to control the heat output in your heated gear.

• Convenient 12 inch chest stowage pocket with integrated phone holder.

• Stuffs into itself and transforms into an integrated zippered stuff sack to allows for storage on the vehicle.
• Stretch side and back panels provide comfort and simple standard sizing.

• Ultra thin design provides comfort and small storage.
• Comfortable heated fleece collar wicks away moisture.
• Narrow elastic sleeve cuff reduces bulk around wrists under your outer jacket.
• Glove connectors are located in zippered pockets at the ends of the sleeves.
• Can be connected at the cuff to our MOTO 12 heated glove product.
• Easy care - hand wash and line dry.

Jacket and Glove liners are energized by ActiVHeat carbon fibers bundles that emit far-infrared light waves to generate deep radiant heat that works on radiated heat than mere conduction as with metal-based heated garments.

Where does the Jacket liner heat?

Using our ActiVHeat far infrared generating carbon fiber bundle technology, these thin jacket liners provide full strength penetrating heat front, back, sleeves and collar of the jacket.

Heated Glove Liners

These are the warmest gloves on the market today - capable of putting out 14 watts of infrared deep penetrating heat per glove or 28 watts per pair - cold hands are just a memory.

Safety Note: These glove liners get very hot at full power and must be used with a heat level controller.

Design

Glove liners are energized by ActiVHeat carbon fibers bundles that emit far-infrared light waves to generate deep radiant heat that works on radiated heat than mere conduction as with metal-based heated garments.

Where do the glove liners heat?

Using our far infrared generating carbon fiber bundle technology, these ultra thin liners provide pleasing penetrating 14.1watts of far infrared heat per hand around the sides of all the fingers and thumb as well as over the back of the hand.

Hook and loop closure on wrist is non-binding and reduces bulk when combined with other gear and the integrated 5.5mm x 2.5mm x 10mm coax barrel socket connects at the cuff to our jacket liner and is compact enough to be stored in even the smallest of compartments such as the 12 inch chest pocket in the jacket liner.

Easy care - hand wash and line dry.

Machine-washable brushed stretch polyester allows for maximum form fit.